Glitter Silk Gift Bag and Box

July 21, 2014 by  
Filed under Core Blog, Provocraft, Spellbinders, Xyron

Picture or Video 6229
Supplies:
Box and bag
Helmer’s Craft Glue
Xyron 250
Glue Dots
Sookwang
Paper Studio pearl
Spellbinder’s Dies – foliage S4-328 and Aster Flower Topper S5-102
My Mind’s Eye Brad
Cuttlebug Embossing Folder
Cuttlebug Embossing Machine
Debbie Stadard here with an easy step-by-step on how to create a festive gift bag and tag for the that next big day of yours! Don’t be afraid to emboss that Glitter Silk. It looks amazing!
1.  First off pick a little box – as you can see I have had this one awhile but that’s ok – I’m covering it. Using the wrong side of your paper mark the bottom of the box and the top of the box and cut out.  The great thing about Glitter Silk is that the back is white so it’s easy to make lines. Then cut a smaller piece to fit in the bottom of the box.
2.  Now glue all the pieces to the box.
Picture or Video 6217
3. Measure around the box and the height of the bottom of the box and cut.  Glue to sides holding to get a tight fit.  If you have to cut a second strip it’s easier to cut one side and then piece it that way.
Picture or Video 6220
4.  Do the same thing for the top of the box.
Picture or Video 6218
5.  Now because I didn’t want my seam to show on to I used these pearls from Paper Studios.  They worked well on here because they are all attached in one long line so you can do an entire side at one time.
Picture or Video 6223
6.  Then I used a Spellbinder’s die to cut my flower and leaves and embossed the them.  I used my Xyron 250 to run the leaves through and attach to the top of the box and then some Glue dots to add the flower after I added a brad.
Picture or Video 6228
7.  Now to make my bag I used the rest of the turquoise sheet.  I embossed it (you don’t sand Glitter Silk due to the glitter finish) and attached it and another embossed purple strip.  Then I made a banner sentiment using the green and layering it with some turquoise and added a David Tutera Sentiment.
8.  Tie a festive bow to the top and you have a great gift set!
 

Summer Party Banner

July 1, 2014 by  
Filed under Core Blog, Provocraft

Decorate for Summer with a fun banner like this one from Tracy Gruber.

TracySummerBanner

Supplies:

Core Essentials CardstockSand It GadgetDust Buddy

Cuttlebug Swiss Dots embossing folder, Lawn Fawn Year stamp set

Rich Cocoa Memento Ink, Create A Critter and Alphalicious Cricut cartridges

Foam Squares, Misc. Ribbon

TracySummerBanner3

1.   Cut 5×5 inch squares from Core Essentials cardstock.  Round the corners with a We R Memory Keepers ¼’’ Corner Chomper. 

2. Cut the letters from the Alphalicious Cricut cartridge at 3 ¾’’ plus the shadow.  Cut the palm trees from the Create A Critter Cricut cartridge, also at 3 ¾.”  I used the flip button for one of them, so they are faced different directions. 

3.  Tear pieces of Core Essentials cardstock for the sandy beach and the water and attach to the squares. Core Tip: Tear different colors of our blue Core Essentials cardstock to create waves.  With five different color families that gives you 20 different blues to choose from.

4.   Emboss the letters and the palm trees with the Cuttlebug Swiss Dots embossing folder and sand with the Sand It Gadget

5.    Attach the letters and palm trees to the squares with foam squares. 


TracySummerBanner2

6.  Tie each of the squares together with ribbon. 

7.  Stamp the dots onto each “sand piece” with Rich Cocoa Memento Ink.  This helps define the sand a little more.

Creating Layouts with School Colors

There are a lot of High School graduations going on right now and  Kate Nolan Denham has a great layout to share with us today using school colors. With such a variety of different colors and kinds of cardstock to choose from, Core’dinations Cardstock can be your go to paper for any occasion!
On this layout, Kate does a great job working around that issue we always find when using Core and embossing folders….”how do I only use a 5×7″ folder on a 12″ layout?” She balances it perfectly with a 5×7″ photo and then, of course, sands!
~~~~~~~~~~~~~~~~~~~~~~~~
Kate here today with a graduation layout that sports school colors from Core’dinations Vintage Collection.  It is one of my favorite collections!
I did a lot of sanding with my Sand It Gadget.  I wanted the color core to really pop on the edges of the mats  where I embossed and scored.  It allowed me to add dimension without having to add more layers.
You can see how awesome the Core’dinations Color Core looks in this up close photo!
Other Supplies:
Fiskars Crimper
Scor-Pal
Spellbinders Nested Pennant Dies
Cuttlebug Embossing Folder
Jenni Bowlin Date Tag
Creative Memories Circle System
Stampin Up! Paper Shapers
American Crafts Thickers
Queen & Co. Pearls

#1 Teacher Gift Bag

I don’t know about you but we are gearing up for the end of school here. With only less then two weeks left, I need to get busy on some gifts for my kid’s teachers and we hope you have been enjoying the ideas so far this week! You can easily incorporate these with layouts, cards or any paper crafting project.

I love a good gift bag and Debbie Standard as one for us today but that’s not the focal point. She created her own award ribbon using some Spellbinders Scalloped Circle dies! Just die cut them with an embossing machine and then cut them into pieces. Sand and then adhere them in a circular pattern, add some banner strips and you are done!

Thank you teacher Debbie1

Supplies:
Darice White gift bag
Cosmo Cricket Core Impressions Neutrals Collection
Core Essentials Brights cardstock
Jillibean Soup letter stickers
Sand It Gadget
Dust Buddy
May Arts Ribbon
Spellbinder’s Die Cut – S4-124 – large scalloped circles
Cuttlebug Embossing machine
Cuttlebug Embossing folder – numbers
Xyron 250
Xyron Mega Runner

 

Cards, cards and more cards!

April 16, 2014 by  
Filed under Core Blog, Provocraft, Spellbinders, Xyron

Today we have some cards from Debbie Standard for Mother’s Day.

I love using my Xyron adhesive runner for these delicate swirls so that I can sand them. Simply cut your swirl from your die cutting machine and then run it through your Xyron adhesive runner. Before you take it off the paper you can sand it without risking tearing it apart.

Picture or Video 5442

Supplies:
Core Basics Snowflake
Core Essentials Darks
Cuttlebug Embossing Machine
Embossing Folders: Darice, Cuttlebug
Dust Buddy
Sand It Gadget
Spellbinder’s Die: Rose Creations and Daisy Heads
Mister Huey Mist – Shine
My Mind’s Eye Brad
Dynamics Rose Die cut, scallop die cut
David Tutera tag
Smooches Stamp
Suink Ink
Sewing Machine
Queen & Co. Rhinestones
American Crafts Tiny flowers
Ribbon: Stash
David Tutera Sentiment Tag
Xyron Adhesive
Fiskars tool
Silhouette Die Cutting Machine

~~~~~~~~~~~~~~~~~

I love using  Silhouette cuts for quick and easy cards like this one.Add a little pink under the die cut out sentiment to make it pop.

After cutting the flowers from a Spellbinder’s die, I curled them over a Fiskar’s tool and sprayed them with Mister Huey’s shine mist.

Picture or Video 5447

Supplies:
Core Essentials Pastels
Cuttlebug Embossing Machine
Embossing Folders: Darice
Dust Buddy
Sand It Gadget
Spellbinder’s Die: Rose Creations
Mister Huey Mist – Shine
My Mind’s Eye Bradd
Queen & Co. Twine
Xyron Adhesive
Fiskars tool
Silhouette Die Cutting Machine

All you need is two kinds of cardstock for this card and lots of layers! Embossing, sanding and die cuts make it looks so easy!

Picture or Video 5449

And a close up of that detail:

Picture or Video 5450

Supplies:

Core Essentials Pastels
Cuttlebug Embossing Machine
Embossing Folders: Darice
Dust Buddy
Sand It Gadget
TomBow Foam Tabs
Spellbinder’s Die: Rose Creations
Mister Huey Mist – Shine
My Mind’s Eye Brad
Queen & Co. Rhinestones
Embossing Folders: Cuttlebug
David Tutera Sentiment Tag
Spellbinder’s Die Cut: Fancy Tags Three
Sewing Machine
Xyron Adhesive
Fiskars tool
Silhouette Die Cutting Machine

Designing with Debbie Standard

I don’t know how she does it but Debbie Standard creats layout after layout and they are ALL amazing AND they showcase Core like no other…ENJOY!
~~~~~~~~~
When I saw these adorable pictures of little Gavin reading I immediately thought of the Cosmo Cricket Neutral collection for my background papers. Gavin adores books and will hunt them out to sit and read and be read to.  I added some Darice Washi tape to create a frame and also along the top of my page. I created the worm and books with a die cut from my Silhouette. I also used some Tim Holtz Distress Stain on my background and some Galatos to create the dribbles on the page.
Picture or Video 5117
Supplies:
Cosmo Cricket Neutral Collection
Basic Core – Red
Darice Washi tape
Patterned Paper:  My Mind’s Eye, Graphic 45
Gelatos:  Faber-Castell
Embellishments:  Graphic 45, Recollections, Heidi Swapp (arrow)
Ink:  Tim Holtz Distress Stains
Hangers:  Tim Holtz
String & Washi Tape:  Queen & Co.
Sand It Gadget
Dust Buddy
Silhouette

 ~~~~~~~~~~~~~~~~~~~~~~~~~

Got these adorable photos of my daughter’s bff’s baby, Gavin and decided to scrap them in a grid design using only the colors in his clothes.  I Cut a border and then cut inside the border to form the outside of my frame.  Then cut strips 1/4″ wide to use as the center strips in my grid.  Then I chose two colors that matched his clothes and embossed them with different embossing folders.  I attached some ribbon around the top one and then used my scraps (I’m all about using scraps!) to make the flowers and hearts to embellish the embossed sections.  I sprayed the flowers and spin using the Mister Huey’s mist before added the brads.
Picture or Video 5161
Supplies:
Core Essentials:  GX-08040-12 (navy); GX-FG010-12 (leapfrog); GX-AB010-12 (harborside); GX-FB010(snowflake)
Cuttlebug Embossing Machine
Embossing Folders:  Darice (hearts), Lifestyle Crafts
Spellbinder’s Die:  Aster Flower Topper (S5-102)Spectacular Spin (S5-114)
Martha Stewart heart punch
Brads:  My Mind’s Eye
Mister Huey’s Mists – Blizzard
~~~~~~~~~~~~~~~~~~~~~~~~
I loved this picture of my son, Jason, and his girlfriend, Maria, taken during an outing to Fredericksburg.  They love having me scrap pages and are getting where they are constantly sending me pictures to scrap (gotta love that after fighting to get pictures of this boy for years!!!)   I went for the 6 X 6 packs to create this and picked out colors from both the Darks and the Neutrals packages.  I first used a die cut to cut out the hexagons and then used different embossing folders to emboss each one with.  Then I sanded them and dusted them off and adhered them to my page.  Then I used my Silhouette to cut some swirls and the hearts and some Spellbinder’s die’s to cut the flowers and the leaves.  As I’ve said before when you cut something delicate like leaves or swirls – run it through your Xyron machine and while it’s still on the wax paper – sand it – it’s alot easier not to tear it that way.
Picture or Video 5148
Supplies:
Core Essential – Snowflake (GX-FB010)
Core Essentials Darks 6 X 6 collection, GX – 3000-06
Core Essentials Neutrals 6 X 6 – GX-3000-05
Tim Holtz Kraft Core 2.25-12 – GX-1920-26
Cuttlebug Embossing Machine
Embossing folders:  Darice, Lifestyle Crafts, Cuttlebug
Silhouette Die Cuts
Spellbinder’s Die Cuts:  Aster Flower Topper (S5-102), Foliage (S44-328); Rose CreationsS5-050)
Mister Huey’s Mist – Blizzard
My Mind’s Eye brads
Queen & Co Pearls

 

Next Page »

48 queries. 1.273 seconds